Cost guide
How Much Does a Kitchen Remodel Cost in Dallas–Fort Worth?
Kitchen remodel pricing in DFW ranges from $35,000 for a same-layout refresh to $150,000+ for a full custom restructure. The biggest budget variables are layout changes, cabinetry tier, countertop material, and the complexity of plumbing and electrical updates.
What drives kitchen remodel cost in Dallas?
Six factors decide where your project lands within the typical range. We discuss all of these during planning so pricing is transparent before construction starts.
1. Scope and layout changes
Keeping the footprint typically costs less than moving plumbing, gas, walls, or major electrical. A same-layout refresh can save 20–30% compared to a full restructure.
2. Cabinetry level
Stock cabinets ($8K–$15K) have the shortest lead time. Semi-custom ($15K–$30K) adds sizing flexibility and finish options. Full custom ($30K–$50K+) delivers unlimited design but requires 8–12 week lead times.
3. Countertops and backsplash
Laminate starts under $2K; quartz and granite run $4K–$10K; natural stone slabs and porcelain can exceed $12K depending on edge profiles, cutouts, and square footage.
4. Appliances and ventilation
Freestanding appliances are budget-friendly; panel-ready and built-in units cost more but integrate cleanly. A custom range hood and upgraded electrical panel can add $3K–$8K.
5. Finishes and details
Lighting packages ($2K–$6K), flooring ($3K–$8K), trim transitions, paint quality, and hardware selections collectively determine whether the result feels standard or elevated.
6. Age and condition of home
Homes built before 1990 often have galvanized plumbing, undersized electrical panels, or non-standard framing that requires remediation. Budget 5–10% contingency for older homes.
Where does the money go?
Here's how a typical DFW kitchen remodel budget breaks down by category. Percentages shift based on scope — layout-heavy projects have higher labor costs, while finish-focused refreshes allocate more to materials.
| Category | % of budget | Typical range | Notes |
|---|---|---|---|
| Cabinetry & Installation | 30–35% | $15,000 – $50,000 | |
| Countertops & Backsplash | 10–15% | $4,000 – $15,000 | |
| Labor (Demo, Framing, Install) | 25–30% | $12,000 – $35,000 | |
| Plumbing & Electrical | 10–15% | $5,000 – $18,000 | |
| Flooring & Finishes | 8–12% | $3,000 – $12,000 | |
| Appliances | 8–15% | $4,000 – $20,000 | |
| Design, Permits, Contingency | 5–8% | $2,000 – $10,000 |
Good / Better / Best — what each tier buys
These tiers reflect typical Dallas-Fort Worth pricing and vary based on kitchen size, layout complexity, and finish selections. Every Genco project receives a detailed, scope-based estimate — not a ballpark.
Good
$35K–$65K
- Stock or semi-stock cabinetry
- Quartz or solid-surface countertops
- Standard tile backsplash
- Same-layout or minor modifications
- Builder-grade appliance package
- Basic lighting upgrade
Better
$65K–$100K
- Semi-custom cabinetry with soft-close
- Quartz or natural stone countertops
- Designer tile backsplash
- Island reconfiguration or wall removal
- Mid-range appliance package
- Layered lighting with dimmers
Best
$100K–$150K+
- Fully custom cabinetry
- Premium stone or porcelain slabs
- Full-height backsplash or specialty tile
- Major layout restructure
- Integrated / panel-ready appliances
- Custom hood, millwork, and elevated hardware
Hidden costs to plan for
Beyond materials and labor, several indirect costs affect your total spend. Planning for these upfront prevents budget stress during construction.
- Temporary kitchen setup — plan for 8–14 weeks without a functioning kitchen. A station with microwave, mini-fridge, and coffee maker keeps life manageable.
- Permit fees — structural, plumbing, and electrical permits in DFW typically run $500–$2,000 depending on municipality and scope.
- Dining out during construction — budget $500–$1,500 for the construction phase depending on family size.
- Material overages — tile, flooring, and trim require 10–15% overage for cuts, waste, and future repairs. Standard practice, not waste.
- Discovery surprises — behind walls in older homes, you may find outdated wiring, water damage, or insufficient framing. Our 5–10% contingency recommendation covers most discoveries.
How Genco keeps kitchen remodel costs predictable
- Scope is defined and documented before any commitments are made
- All selections (cabinetry, countertops, tile, hardware) are locked before demo begins
- Realistic contingency is built into the budget during planning
- Home condition is assessed during discovery to anticipate hidden issues
- Change orders are minimized because decisions aren't made during construction
- Detailed proposals itemize every line so you know exactly what you're paying for
Frequently asked
Questions we hear most
Kitchen remodels in the Dallas-Fort Worth area typically range from $35,000 to $150,000+. A mid-range remodel with semi-custom cabinetry, quartz countertops, and moderate layout changes averages $65,000–$100,000. The primary cost drivers are cabinetry tier, layout complexity, and finish selections. We provide detailed scope-based estimates during the planning phase.
Cabinetry is consistently the largest single expense, typically representing 30–35% of the total budget. Custom cabinetry with specialty finishes, soft-close hardware, and built-in organizers can cost $30,000–$50,000+ for a mid-to-large kitchen. The second largest cost driver is labor for layout changes that involve moving plumbing, electrical, or structural walls.
Yes, but scope will be limited. A sub-$50K remodel typically means keeping the existing layout, using stock or semi-stock cabinetry, choosing laminate or entry-level quartz countertops, and limiting electrical and plumbing changes. If your kitchen has good bones and you're primarily updating finishes, this budget can produce a clean, functional result.
Most kitchen remodels take 8–14 weeks from demolition to completion. A same-layout refresh with stock cabinetry may finish in 8–10 weeks, while a full restructure with custom cabinets can take 14–18 weeks. Custom cabinetry lead times (8–12 weeks) are the biggest schedule variable. We lock the schedule during planning so there are no surprises.
Getting 2–3 proposals is reasonable, but compare scope — not just price. The cheapest bid often excludes items that surface as change orders during construction. Ask each contractor what's included in their number: design fees, permits, demolition, haul-off, and contingency. Our proposals are detailed and scope-specific so you know exactly what you're getting.
Usually because of three things: (1) different cabinetry tiers assumed (stock vs. semi-custom vs. custom), (2) different allowances for counters, tile, lighting, and fixtures, and (3) what's excluded — appliance install, electrical upgrades, permits, demo haul-off, painting. A lower number isn't a deal if the scope is smaller. Ask each contractor to show line items and allowances side by side.
According to national remodeling data, a mid-range kitchen remodel recoups approximately 60–75% of its cost at resale, while a minor kitchen refresh can return 75–85%. In the competitive DFW housing market, a well-executed kitchen remodel also reduces time-on-market and helps your home stand out against comparable listings.
Start with your goals (layout change vs. finish update), then align your budget to a finish tier. We recommend allocating 5–10% for contingency and separating appliance costs from construction costs. During our consultation, we help you prioritize where to invest and where to save so the budget delivers maximum impact.
We recommend 8–12% contingency for kitchens in homes built before 2000, and 5–8% for newer homes. Contingency covers things you can't see until walls open — outdated wiring, undersized supply lines, water damage behind cabinetry, framing that needs reinforcement. Unused contingency stays yours; it's a budget cushion, not a fee.
Safe places to save: keep the existing layout, choose a high-quality stock or semi-stock cabinet line instead of fully custom, use quartz instead of natural stone, skip panel-ready appliances, and pick a simple tile pattern. Risky places to save: waterproofing, electrical, ventilation, and structural work — corners cut here surface as expensive problems later.
Our proposals include design and planning, demolition and haul-off, all labor and materials, cabinetry installation, countertop fabrication and install, tile, flooring, plumbing and electrical work, lighting, trim, paint, and final cleanup. Appliances are quoted separately since clients often prefer to purchase directly for warranty purposes.
We lock scope and selections before construction begins, include realistic contingency in the budget, assess the home's condition during discovery, and document every decision. Change orders happen when decisions are made during construction — our process prevents that by front-loading the planning work.
We don't offer in-house financing, but many of our clients work with home equity lines of credit (HELOCs), home improvement loans, or cash-out refinancing. We can provide detailed proposals that help with lender applications. Some clients also phase their remodel to spread costs over time.
Get a real number for your kitchen
Schedule a consultation and we'll align your goals with a realistic budget — scope, finish level, and timeline mapped before you commit.